Manufacturing: Precision Automation for Production-Line Readiness
In modern manufacturing, the warehouse is no longer an isolated cost center—it is a strategic buffer and a direct extension of the production line. Raw materials, work-in-progress, tooling, and finished goods must flow with surgical precision to meet just-in-time schedules, minimize line-side footprint, and adapt to high‑mix, low‑volume volatility. Any interruption in material availability translates instantly into costly downtime; any excess inventory silently erodes already thin margins.
KINGSHELVING delivers automated storage solutions purpose‑built for the rhythms, load profiles, and operational discipline of manufacturing. Our systems are not off‑the‑shelf products—they are production‑grade infrastructure that synchronize with your line speed, speak the language of your MES, and deliver decade‑after‑decade reliability in harsh industrial environments.
I. Core Competencies: Seven Dimensions of Manufacturing Automation
1. Heavy‑Load Handling – Carrying the Weight of Industry
Manufacturing speaks in kilograms and tons. Engine blocks, transmission assemblies, metal coils, large dies, wind turbine bearings, aerospace structural parts—unit loads often exceed one metric ton. General‑purpose automation fails here.
KINGSHELVING’s high‑capacity stacker cranes and pallet shuttles are engineered for heavy industry:
Rated loads from 1.5t to 5t, with custom reinforced structures for extreme duty.
Dual‑/triple‑mast designs that resist torsional deflection under high speed and heavy load, maintaining ±3 mm positioning accuracy.
Hardened rails and high‑rigidity forks capable of tens of thousands of full‑load cycles without plastic deformation.
Multi‑layer safety redundancy: anti‑fall devices, overload protection, slack rope detection, fork collision sensors—every safeguard for moving multi‑ton loads 10 meters above the ground.
Real‑world proof:
At Tianjin Hongda Textile Machinery, our beam‑rack system handles 3000 kg per position in a 0.5‑aisle configuration—delivering heavy‑duty storage where standard equipment would fail.
For CFHI (China First Heavy Industries), we supplied a 384‑position beam rack system with 500 kg per pallet, supporting the storage of large forged components.
At Taiyuan Heavy Industry, our bin‑rack solution stores heavy machinery parts with 150 kg per position in a single‑aisle layout.
2. Production Integration – Not an Island, but an Organ of the Factory
An automated warehouse in manufacturing must not be a black box; it must become a live, bidirectional node in the production ecosystem.
KINGSHELVING offers deep line‑side integration:
Mechanical interfacing: Shuttles and stackers connect directly with roller tables, assembly lines, and test stations—zero‑touch material delivery.
Control‑layer integration: WCS communicates in real time with PLCs and SCADA, responding to line start/stop signals and dynamically adjusting supply cadence.
Software‑layer integration: WMS exchanges data bidirectionally with MES/ERP via APIs, middleware, or RFCs—full transparency from production schedule to material consumption.
Real‑world proof:
At Nanjing Fengdong Heat Treatment Engineering, our beam‑rack system (2 aisles, 1500 kg per position) is tightly coupled with the heat treatment line, ensuring seamless flow of heavy components into and out of the furnace area.
At Wolong Electric Group, a 4‑aisle, 3456‑position beam‑rack ASRS is directly fed by production and feeds assembly lines on demand, with WMS/MES synchronization eliminating manual data entry.
3. Material Visibility – From “Man‑to‑Goods” to “Goods‑to‑Man”
The largest hidden cost on the shop floor is not equipment depreciation—it is the cost of looking. Looking for materials, tools, pallets, storage locations. Waiting for stock‑out resolution.
KINGSHELVING WMS delivers full‑dimensional material visibility:
Granular location management: Support for zone‑, rack‑, level‑, position‑, and even bin‑level tracking; hybrid RFID/barcode deployment for optimal cost‑benefit.
Real‑time inventory dashboard: Unified view of central warehouse, line‑side buffers, and WIP staging—any item, any quantity, any status, anywhere in the factory.
Intelligent put‑away: System‑recommended storage locations based on ABC frequency, physical dimensions, affinity, and shelf‑life requirements.
Kitting verification: Automatic bill‑of‑material validation before job release; shortage alerts prevent line stoppage.
Real‑world proof:
At Jiangsu Jiangnan High Polymer Fiber (Phase I, 12,288 positions, 3 aisles, 530 kg), our WMS provides complete traceability from raw material receipt to finished goods dispatch, enabling first‑in, first‑out discipline and paperless operations.
4. Just‑in‑Sequence (JIS) – Built for Mixed‑Model Production
Modern manufacturing is defined by high‑mix, low‑volume production. A single assembly line may build seven or eight different vehicle configurations simultaneously; line‑side delivery must match the exact sequence of passing workpieces. One sequencing error = line stop.
KINGSHELVING delivers complete JIS solutions:
Sequenced outbound: WMS receives production sequence orders and dispatches materials strictly in build order, delivered via conveyor or AGV directly to the point of fit.
In‑rack resequencing: The system reorders pallets inside the ASRS buffer—no extra floor space needed.
Sequence verification: Vision or RFID readers at outbound ports automatically confirm correct order; mismatched loads are rejected and recirculated.
Real‑world proof:
At Xi’an BYD Auto, a 5‑aisle, 480‑position beam‑rack system feeds the assembly line with sequenced parts, supporting high‑volume mixed production.
At Chongqing Changan Automobile, our single‑aisle, 150‑position beam rack handles 2000 kg per pallet, delivering engine components in precise JIS order.
Volvo Auto Parts Branch relies on our 32‑position, 500 kg beam‑rack system for just‑in‑time delivery of critical spares.
At Foshan Huaxiang Automotive Metal Parts, a 4‑aisle, 4202‑position beam rack supports JIS delivery of stamped body parts to multiple nearby assembly plants.
5. Tool & Die Management – The Overlooked Productivity Bottleneck
In aerospace, automotive, and heavy equipment, tooling and dies are the gatekeepers of production. Yet many manufacturers still rely on paper logs, manual search, and forklift shuttling. Lost tooling, overdue calibration, long changeover waiting times—these are the hidden drains on OEE.
KINGSHELVING’s automated tool‑die warehouse solutions:
Heavy‑duty design: Loads from 1t to 10t, accommodating large injection molds, stamping dies, composite forming tools.
Extended‑length storage: Positions up to 6 m long for aerospace tooling.
Intelligent maintenance linkage: System tracks each tool’s in‑service time, usage count, calibration due date; automatically locks out expired tools and triggers service tasks.
Quick‑change interface: Outbound stations interface with die carts or AGVs for unmanned mold delivery to presses.
Real‑world proof:
At Shenyang Minhua Mould Technology, our cantilever rack system (1 aisle, 1012 positions, 400 kg) stores large injection molds with full digital traceability, reducing mold search time from hours to minutes.
AVIC Changhe Aircraft Industry uses our cold‑storage beam‑rack system (1 aisle, 240 positions, 350 kg) to store composite tooling under controlled temperature, ensuring dimensional stability before production runs.
6. Special Condition Adaptability – From -30°C to Explosion‑Proof Zones
Manufacturing environments are rarely 20°C cleanrooms. Cold rolling mills operate at -30°C; paint shops demand explosion proofing; foundries choke with dust; heat treatment plants radiate thermal stress.
KINGSHELVING delivers environmentally hardened hardware:
Low‑temperature packages: -30°C‑rated lubricants, cold‑rated servo motors, heated control cabinets, anti‑freeze sensors.
Explosion‑proof configurations: Ex d / Ex e enclosures, ATEX/IECEx certified for hazardous areas (paint, solvent, petrochemical).
High‑dust protection: IP6X sealed enclosures, positive‑pressure options for foundry and powder applications.
Corrosion‑resistant coatings: Heavy‑duty epoxy systems for electroplating, pickling, marine equipment manufacturing.
Real‑world proof:
Jiujiang Petrochemical Plant operates our 312‑position, 1000 kg beam‑rack system in a hazardous Zone 2 area, with full Ex‑rated controls and corrosion‑resistant rack coatings.
At AVIC Changhe Aircraft, the cold‑storage ASRS maintains a stable -20°C environment for composite material tooling, with specially formulated lubricants and sealed electronics.
7. Line‑Side Logistics – From “Flood Irrigation” to “Precision Drip”
Traditional manufacturing logistics is flood irrigation: large batches of material dumped at the line, blocking aisles, obscuring vision, tying up cash, and inviting errors.
KINGSHELVING enables precision logistics transformation:
High‑frequency, small‑lot replenishment: WMS triggers replenishment tasks by the hour—or even by the minute—based on real consumption.
AGV/AMR flexible delivery: Autonomous vehicles transport materials from central ASRS or buffers directly to workstations; empty carriers automatically returned.
Virtual line‑side inventory: Line‑side locations are managed within the WMS storage map; real‑time consumption triggers automatic refill requests.
Full‑empty exchange: Full pallets delivered; empties retrieved in the same cycle—clear aisles, continuous flow.
Real‑world proof:
At BYD’s Huizhou Daxin plant, a 5‑aisle, 862‑position bin‑rack system supplies assembly stations via AGVs, with WMS orchestrating more than 200 replenishment missions per shift.
Zhejiang Wanhao Wanjia Industrial uses our 3‑aisle, 790‑position beam‑rack system to feed furniture production lines in exact sequence, reducing line‑side inventory by 40%.
II. Cross‑Segment Practice – Proven Across Manufacturing Verticals
Automotive & Tier‑1 Suppliers
Projects: Xi’an BYD, Huizhou BYD, Changan, Volvo, Foshan Huaxiang, Zhejiang Longsheng, Jiangsu Jintan Zotye, BorgWarner, Shanghai Yanfeng, etc.
Typical load: 500–2,000 kg
Key technologies: JIS sequencing, PLC handshake with assembly lines, MES/ERP traceability
Outcome: Line‑stop waiting time reduced by >70%, line‑side footprint cut by >50%
Aerospace & Defense
Projects: AVIC Changhe, AVIC Aviation Equipment, Jiangxi Hongdu Commercial Aircraft, Harbin Dongan Engine
Typical load: 350–3,000 kg (tooling); 50–500 kg (standard parts)
Key technologies: Extra‑long storage positions, heavy‑duty stackers, batch/serial‑level lifecycle traceability, cold‑storage capability
Outcome: Tool‑setup time reduced by 60%, shop‑floor space saved >30%
Heavy Machinery & Equipment
Projects: CFHI, Taiyuan Heavy Industry, Wuchang Shipbuilding, Yankuang Donghua, Kunming Yunnei Power, Nanfang Pump Industry
Typical load: 500–3,000 kg
Key technologies: Dual‑mast stackers, reinforced forks, anti‑tipping safety systems
Outcome: Elimination of ground stacking; heavy items stored vertically with full accessibility
Electronics & Precision Manufacturing
Projects: SMIC Jiangyin, Nuctech, Shenzhen Clou Electronics, Gree Electric (Hangzhou), Jiangsu Aitefu
Typical load: 30–200 kg
Key technologies: ESD‑protected racking & totes, micro‑contamination control, Miniload high‑speed存取, pick‑to‑light
Outcome: Item‑level traceability, cleanroom‑compatible storage, 99.99% inventory accuracy
New Energy & Battery Manufacturing
Projects: ATL, Sunwoda, CosMX, SVolt, Guoxuan, Tianchen New Energy, E‑Power, BTR, etc.
Typical load: 50–1,500 kg
Key technologies: Dedicated fire‑isolated storage for Li‑ion cells, humidity‑controlled zones, special spreader bars for electrode rolls
Outcome: Compliance with UL/UN38.3 battery storage standards; seamless synchronization between electrode production and cell assembly
III. Full Lifecycle Empowerment – From Planning to Sustained Performance
KINGSHELVING delivers far more than automated equipment—we deliver manufacturing logistics capability.
Planning Phase
We analyze your BOM structure, routing, production takt time, SKU Pareto.
We run 3D logistics simulations to quantify throughput, equipment utilization, and ROI under different automation scenarios.
We sit down with your process engineers, production planners, and IT architects to jointly define WMS/MES/ERP integration specifications.
Execution Phase
We design and manufacture stacker cranes, shuttles, racking, and WMS/WCS core modules in‑house—total control over quality and delivery.
Our project teams bring multi‑industry implementation experience (automotive, aerospace, heavy machinery, electronics), and understand the quality systems you live by (IATF 16949, AS9100, GJB).
We parallel‑execute with your plant expansion, line retooling, or facility relocation—no delays, no friction.
Sustainment Phase
24/7 remote monitoring and diagnostics; 2‑hour critical response commitment.
Preventive maintenance schedules that keep unplanned downtime below 1%.
Continuous WMS/WCS evolution—your system grows as your business rules evolve.
IV. Your Manufacturing, Our Commitment
Modern manufacturing competition is, at its core, supply‑chain speed versus cost. The warehouse has moved from the periphery of logistics support to the very center of production flow.
KINGSHELVING understands this. Every rack we roll, every line of control code we write, every system we hand over serves a single purpose: to keep your production lines running without pause, and to ensure every inventory dollar works for you, not against you.
Whether it is a five‑ton aerospace die or a fingernail‑sized precision chip; a -30°C freezer environment or an explosive‑proof paint shop; single‑model mass production or mixed‑model sequencing of hundreds of variants—KINGSHELVING possesses the proven engineering blueprint and the field‑tested experience.
We respect your craft. We synchronize with your cadence. We build your competitive moat.
What we deliver is not a warehouse—it is manufacturing logistics execution capability.
